Hot Dipped Galvanized 30° Framing Nails. SUPERIOR DRIVE THAT HELPS ENSURE FEWER JAMS AND MORE NAILING. Our industry leading nails are designed and manufactured to match the specs of Paslode nailers so your nailer. The Paslode 905600 framing nailer is capable of firing 2 inches to 3-1/4 inches sized framing nails, depending on what you prefer. Instead of compressed air, the Paslode 905600 works with a combination of 7.4 volts lithium ion battery and Paslode's framing fuel cell. Reinforced round head design for better drive performance in the hardest materials 10% more nails per strip means less reloading Bonds with wood fibers increasing the holding power Rigid and compact strips are more durable and easier to handle Compatible with most clipped head nailers 2-3/8″ Length 30° Collation Angle Set of 5000 Nails.
3 Paslode Framing Nails Harbor Freight
3 Paslode Framing Nails Harbor Freight
Paslode 30 Degree Framing Nails
| Finish | Other Names | Description | Class |
|---|---|---|---|
| Bright | Bright Steel | Un-plated, bright iron with no corrosion protective coating. | 1 |
| Copper | Copper Flash | Thin copper coating generally used for the protection of bright steel staples. | 1 |
| Electro Galvanised | E/Galv | Electromagnetic Galvanising uses electrolysis to draw zinc and chromate onto the surface of bright steel. The result is a thin galvanised layer with a smooth finish, typically up to 10μm (microns). | 2 |
| Mechanical Galvanised | M/Galv | Nails are coated with zinc by peening powdered forms of the desired coating onto the surface of the nails. | 2 |
| Galvanised | - | Similar to Hot Dipped Galvanising, the zinc coating is applied by immersing a solid continuous wire feed in molten zinc. | 3 |
| Armor Galv | - | A corrosion resistant zinc/iron alloy coating with a uniform thickness of 40μm microns. Armor Galv nails are suitable for exterior applications where a traditional HDG or M/Galv fastener is specified. | |
| Hot Dipped Galvanised | HDG | Nails are dipped into hot melted zinc until a surface layer of minimum 50μm of zinc has been created. The thickness of the zinc layer varies from minimum 50μm to typically around 80μm. | 3 |
| Polymer Coated | Dip Coated | A functional resin or glue coating is applied to the nail shank to reduce the required nailing power and also to increase the withdrawal resistance of the nail.- | - |
Paslode B31250T 2500-Pack 75mm x 3.06mm Hot Dipped Galvanised RounDrive Strip Nails with 2 Fuel Cells Set W W Paslode B31250T 2500-Pack 75mm x 3.06mm Hot Dip $ 181 13 FREE SHIPPING.
